220 Volt/ 100 Watt Large Electric Honey Uncapping Decapping Knife Beekeeping Scraper Jointer Hot Wax Knife Bee EU Plug

Amazon.com Price: $74.30 (as of 15/11/2021 10:15 PST- Details)

Heated and easily cut wax cappings off from the frames for honey extraction. Working temperature of knife blade: not less than 150°С/ 302F
Power supply: 220Volt EU plug ; Heater power: 100 watt ; Warm-up time to operating temperature : 10-15 min
“Jointer” Knife – is designed for printing with honey and honeycomb for cutting wax. The blade of the knife is located across the line of motion and the lid is very clean cut off a sharp blade.

View cart

Description

Specifications:
Power supply: 220Volt EU plug (± 10%, 50Hz)
Heater power: 100 watt
Working temperature of knife blade: not less than 150°С / 302 F
Warm-up time to operating temperature : 10-15 min
Energy protection class: II

Dimensions:
Blade width : 11 cm (4,33 inch)
Blade height : 3 cm (1,18 inch)
Handle length with casing : 30 cm (11,81 inch)
Handle diameter : 2.5 cm (0,98 inch)
Cord Length: 150 cm (59 inch)
Weight: 380 gram

Manual:
1) Before you begin, print a frame must be installed on the stand to cut cellular framework (see stand for cutting cellular framework sided and double/sided), under which must be trimmed capacity to collect wax. Turn the device on to 220V supply voltage and wait for 15 minutes to heat the blade to working temperature.
2) Then proceed directly to the printing frame, and the blade unit are from top to bottom. Removable wax twists and falls into the container.
3) After processing one side of the frame to start printing the other side of it. In the same manner, the next frame process.
4) Operating mode: 4 hours of work; 0,5 hours – cooling

Included:
1 x 220V/100W electric decapping knife “Jointer”
1 x English manual

**SUPPORT ONLY 220-230V**
!!! WHO WANT USE THIS DEVICE IN 110-120V NEED AC VOLTAGE CONVERTER, NOT WORK IN USA AND CANADA !!!

Heated and easily cut wax cappings off from the frames for honey extraction. Working temperature of knife blade: not less than 150°С/ 302F
Power supply: 220Volt EU plug ; Heater power: 100 watt ; Warm-up time to operating temperature : 10-15 min
“Jointer” Knife – is designed for printing with honey and honeycomb for cutting wax. The blade of the knife is located across the line of motion and the lid is very clean cut off a sharp blade.
“Jointer” Knife is very easy to use, especially who have to pump out the honey with a large number of frames. Pump out the honey from the frames printed with this knife has less wax and the filter will clog less often.